How Do You Make an Industrial Pipe Bookcase?

How do you make an industrial pipe bookcase? It isn’t as easy as it sounds, or as fun as it looks. To make an industrial pipe bookcase you need a few basic tools: two large and deep (or wide) books to hold the pipes that are to be placed inside the bookcase; two large Brad nails; a level; and two hydraulic jacks or power drills. There are many different ways to build your own bookcase from the basic materials outlined above. You can choose to follow the blueprints for a custom pipe bookcase or you can choose to follow the guidelines of an industrial plumbing guide. Whichever way you go, the result will be a bookcase made to last for generations.

If you have purchased a bookcase with interior walls, you will want to frame and insulate the books before you place them inside. By insulating the books, you keep heat and moisture out of the pipe joints where they are located. The first thing that you need to do is measure the interior dimensions of the wall and the pipe which you will hang upon it. After that you need to measure and mark the location where the first bookcase will be installed. Make sure that the length is at least three feet longer than the largest wall of the bookcase.

Now it is time to measure and mark the locations on the wall where you will hang the vertical plumbing pipes. You need to make sure that they run parallel to the wall. With this information you will be ready to measure and mark the locations of the vertical pipes. You should measure and mark all the places where there will be holes in the pipe bookcase. Remember to keep the distance between the pipes at least one foot.

Now you would have already cut the pipe that you would use for your pipe bookcase. You can leave the left over part as is if you are not using it for something else. If you want to install the bookcase right then you should start by drilling the pilot holes in all the walls and floors which would correspond to the pipe sizes.

Once you have aligned all the holes appropriately you can go ahead with the next step. This is the assembling stage. For the first sections of the bookcase, you should remove all the boards that would make it unstable. Then you would need to connect the sections with pipe. It would be better if you would use galvanized pipe since it would make it last for a longer period of time.

For the next part you should connect the remaining parts which comprise the side panels of the bookcase. When you have done this you should make sure that the wall connectors are connected properly. It would be better if you would follow the instructions that came along with your wall clamps. You would need to drill some more holes for the wiring, then you would be good to go.

The last but not the least important step that you need to take when learning how do you make an industrial pipe bookcase is to hang it up. To do this you would need to attach the wheels at the bottom of the unit. This will help you to move it around when you need to install or remove something from the unit. If everything goes well, you would have an industrial pipe bookcase that you can be proud off.

If you would find it difficult to finish learning how do you make an industrial pipe bookcase, you can always take the help of a professional. There are several companies that provide services related to pipe bookcases. You can always inquire from these companies if they have any contractors that offer help with learning how do you make an industrial pipe bookcase. These companies will be more than happy to help you by giving you some ideas on making your own bookcase. The best part about these companies is that they usually provide materials that you will not be able to find anywhere else.