How do you make PVC pipe shelves? This project is relatively simple and a DIY project does not need any special tools or experience for that matter. You will be using the basic hammer drill and a drill bit and fittings to hold up the boards. Before you do that, though, it would be best to have a basic understanding of plumbing, including pipe installation, couplings, water pipes, faucets, and drains. If you are not sure how to handle these tasks, you may want to hire the services of a licensed plumber instead.
The first thing you should learn when learning how to make PVC pipe shelving is how to properly secure the boards to each other. For that, you will need the use of clamps. If you are doing a small project like this, then you can probably get away with using just plumbers’ tape. However, if you are going to go all out, then consider using the actual parts of pipe that you would use to build a shelf, except for the end part, which you will have to drill through. When you buy the pipe, you should note the length and diameter so you will know how much pipe to buy.
Once you have the pipe clamped down, then you can begin the actual process of building shelving out of it. The first thing you will need to do is install the clamps around the entire pipe and make sure that the distance between them is a reasonable size. If your plumbing needs are very minor, then this shouldn’t take long. If you happen to have a larger pipe that you are going to be installing shelves on, then you will also need to buy some other hardware such as the nut and washers. When you get to the connecting sections, you should remember that they connect to one another through bolts, so you will want to double check that everything is connected properly. Once that is done, you will be ready to put the pipe shelving together.
Now that you have put the shelving together, then you need to take the pipe fittings that you bought and screw them onto the pipe. You will need to make sure that the nuts are on securely so that the shelf will be stable. Now you will need to fasten each shelf onto the pipe and secure them with bolts. When you have the pipe shelving installed, then you will be ready to install any plumbing fixtures that you may need to complete the project.
The last step in learning how do you make PVC pipe shelving? Then you need to take the last two sections and fasten them onto one another with more caulking. This will help make the wall stronger. This will also help you determine how many shelves to purchase when you are finished.
Learning how do you make PVC pipe shelving? It is not as difficult as it may seem. The first step is to purchase all of the materials you need at the same time. Most hardware stores carry everything you will need, but if they do not, then you can shop online. There are many different places online that sell PVC pipe fittings, including building supply stores and home improvement stores.
Once you have all of the materials, you will want to take the measurements. These measurements will be used to make sure that the shelving will fit, and that you have enough left over to complete other projects. This may mean that you need to go to a home improvement store and get some more materials. If you are buying the materials online, then you will need to know the exact measurements of the space where you want the shelving placed. If you are installing the shelving in someone else’s house, then you need to make sure that their measurements are right too.
After you know the measurements and have the materials on hand, you can start installing. You will probably need a drill bit and a good power drill to make sure that your holes will be straight. Before you begin drilling, make sure that you have the proper nuts and bolts already attached so that you don’t lose them while you are installing. Then put the shelves in place, and enjoy your new looking shelving system!