Is PEX Ok For Compressed Air?

You might have noticed that your air pressure was low when using your toilet, and you may have thought “is PEX ok for compressed air?” Toilet paper is composed of several layers of paper, and when these layers are exposed to air they become damp and start collecting tiny pieces of dirt. This is the first stage of an air leak, and as it continues, the pieces of dirt will get smaller until they completely block the airway. If this happens the only thing you can do is to find some other way to use the toilet, but what if there was a way to prevent this from happening in the first place? There are a few simple tips that you can put into action that will make sure that your PEX plumbing fitting is able to handle any air pressure that is placed on it.

PEX fittings are not made out of the same material as standard plumbing pipes and therefore can be more prone to becoming damaged due to pressure levels. The actual material is called PVC, and although this material seems like it would be very easy to repair, the truth is that repairing it can sometimes be quite expensive. So, if you have an accident where you pump a tank and find that the valve has sprung a leak, it’s best just to throw the PEX away and go and buy a new one. This will cost you a few pounds but in the long run it’s probably cheaper than having to pay for repairs on a regularly used plumbing piece.

So, is PEX ok for compressed air? It’s probably best to go and rent a pressure washer to check this out yourself, but if you don’t feel like using the pressure washer to try to see if your plumbing is OK then there are a few other things that you can do. One of the easiest (and probably quicker) ways to check are PEX pipe seals, and this is something that can easily be done by simply sticking your finger in the pipe and pushing inwards. If there’s a bit of air trapped then this is a sign that your plumbing is OK.

Another sign that your toilet is OK is if it doesn’t leak at all. This may sound like a silly question, but it’s one that often gets asked when people are installing PEX plumbing and they find that it won’t fit. When you install a PEX pipe, there will be some air between it and the pipe of the toilet paper, and if there’s any left then it means that there hasn’t been enough pressure created to force the seal down, and consequently there’s no room for the toilet paper to expand back into the pipes. You’ll often hear people complain that toilet paper always comes out at the bottom of the potty. This is because the seal between the toilet paper and the walls of the potty breaks down, and the two materials are unable to properly co-operate.

However, if you do experience signs of these problems, then you have a problem with PEX and compressed air. If the above signs are ignored, then the next step is to find out if the problem is something more serious, like blocked drains or faucets. But before that, check your circuit breaker. If it’s tripped, then call in a professional. You don’t want to risk a potentially dangerous situation.

Before you call in the professionals though, you should confirm that your PEX plumbing and compressed air problem is isolated to just that one area, or that all you have is one of those signs that the plumbing is working correctly. This can be determined by looking at your handiwork, and comparing it to the picture on your toilet paper. If you’ve used PEX and it looks like your work is OK, but the paper is discoloured, or you can’t see any detail on the wall, then there’s a problem somewhere else in your home that could be much more dangerous.

Checking the plumbing supplies is one way to determine if your PEX plumbing is good enough. If you have any green stains on your hands, or in the floor around your PEX plumbing, then you have plumbing leakage. If you have any signs of rust on your plumbing, or if the pipe or joint is loose, then you definitely need to call a professional plumbing company to take care of the problem. A broken pipe or other problem in your plumbing can lead to toxic fumes, so if there’s no blood, mildew or smoke coming from the area when you try to flush the toilet, then you should be safe to use your compressed air cleaner to clean it up.

The most common causes of plumbing leaks are: worn-out connections, excess pressure, small cracks, corrosion and freezing. To find out what is causing your problem, you should consult with a PEX contractor, who will be able to give you advice on what is best for your needs. Don’t take risks with your plumbing supplies by trying to fix your PEX leak on your own.