Pool Plumbing Repair and Maintenance Tips

Most times, plumbing repair can be done on initial visit to your home pool. However, there might be an occasion where the homeowner who has the responsibility of maintaining a pool needs to schedule another repair for a day. For example, if the chlorine level is too low in the pool, you might want to add some more. The main parts of your pool plumbing system often check for leaks:

Leaking fittings – Most of the time, it is the fittings that are leaking that cause a leak. A few of the common materials used in plumbing repairs for leaky pipes include brass, copper, cast iron, steel, plastic, and other non-metallic materials. In cases where the material is plastic, it is important to use chlorinated swimming pool water. These tips will help you find the source of the leaky pipe or fitting.

When it comes to pool plumbing repair, hiring a professional can make things easier. While doing the leak detection on your own might give you the information you need, it might take you more time to find the right one. Also, when you call a plumbing contractor to check your leakages, they could provide the best leak detection process. Here are some of the basic plumbing repair leak detection methods that are used by professionals:

Automatic Check – One of the simplest methods in pool repair is the automatic check. This is performed by inserting a flexible hose inside the plumbing system, and activating it. Once the water level rises and falls, this device will trigger off a non-stop recording of the changes. This is useful in determining the leaks.

Pumps And Filters – A leaking pump is the most common cause of a plumbing problem. To check whether the pump is leaking, insert a flexible sleeve into the system. The level should rise within a few minutes. If there is a drop in the water level, then this means that the pump has not been working properly. To fix the problem, replace the pump with an appropriate model.

Suction Side Leaks – Usually caused by the failure of the suction side flapper valve, a suction side leak is easy to detect. This type of leak can be detected by the distinct absence of bubbles when the water starts to drain from the faucet. To fix this, open the valve partially or completely, and allow the water to drain through the crack.

Common Pool Repair Mistakes – One of the most common pool repairs involves changing the filters. When this is done, it is vital to understand how the filters actually work and why they need to be changed. Most of the time, these filters are clogged with lime scale and other build-up that block the flow of water through the filter. When this blockage occurs, the pool water cannot efficiently be cleaned and disinfected. To resolve the problem, remove the filters from the system and replace them with new ones.

Leak Detection And Inspection – Although leaks are usually easy to detect, sometimes it is necessary to use special tools to detect a leak. For example, some pool pumps contain oil traps that trap the oil when the pump is not operating properly. When a pump leaks, the oil will accumulate in the pump body and cause a vacuum. This vacuum will cause any and all excess oil to escape and pollute the pool water. To solve this problem, ensure that the fittings of the pump are checked and replaced if necessary.

Pool Color Test – A pool leak often shows up as a greenish tint on the exterior of the pool. If this is the case, ensure that your pool chemicals are replenished regularly and that the filter is cleaned and reinstalled. If you find this to be the case, then you may need a pool leak detection and repair service. A pool color test is also an excellent way to determine which chemicals are causing the color change and which additives are necessary to resolve the problem.

Pool Water Loss Tests – As a general rule, it is important to have your pools tested annually for both water loss and bacteria levels. By testing your pools for these two parameters, you can determine if there are any problems with your plumbing or if you are simply experiencing a normal water loss. Most leak detection professionals include a water loss test kit that can be used to conduct both tests. By utilizing this kit, you can determine the extent of your water loss and address it accordingly.

Leak Detection and Repair – When your pool leak is detected, then a leak repair specialist can assess the issue and recommend the best course of action. One common recommendation is to have the pump checked by a professional plumbing contractor prior to repairing the leak. This is because the pump is typically responsible for moving large volumes of water through your pool system and because of its sensitive construction, damage from a leak can be much more severe than damage to a pipe or other part of the system. Pump failure can result in pool water loss of significant volumes – up to 100 gallons per minute – so it’s important to ensure that it is functioning properly before attempting to repair the leak. In addition, repairing a leaking pump often requires additional and costly repairs, such as cleaning and sealing the pump galleries.