What You Need To Know About Bathroom Lighting Fixtures

Feel good about what you see at night in your bathroom, and look forward to your day going your way every morning. Quality, well placed, high-voltage bathroom lighting makes the difference in how comfortable you feel when bathing or showering. A properly installed, high-voltage fixture helps reduce electrical problems, such as leaky faucets and broken light bulbs. Bathroom vanity lights and light bar fixtures help you read when bathing or showering, improve your night vision, and add a soft glow to your bathroom. High-voltage plumbing fixtures are also useful in areas that don’t have adequate outlets, such as basements or garages. A well-placed light bar fixture or vanity light can give your bathroom a natural light source in an area that might otherwise be dark.

You might think that bathroom lighting fixtures only serve a practical purpose. But there’s a lot more to consider than practicality when it comes to the proper placement of lights. Placed incorrectly, they can create eyesores that detract from the overall beauty of your room. Under-cabinet lighting is especially troublesome, because it often comes on automatically as you enter the room. The wrong bulbs in the wrong place can mean that your guests wind up seeing the floor around your sink or the bottom of your toilet bowl. To avoid this problem, learn the right combination of bulbs for your lighting needs and find out which bulbs work best for your specific fixtures.

Placed improperly, bathroom lighting fixtures can also glare into your neighbor’s bedroom or into your own! To get the most out of your fixtures, keep them well away from any sources of overhead lighting. Use a dimmer on your lights when you need to control the amount of light entering a room. Also, check that all of your fixtures are the right size for your space. Most fixtures are between eight and ten inches taller than the wall and between ten and twelve inches wide, depending on the size of your bathroom.

One of the most common mistakes with bathroom lighting fixtures is over-angling or positioning the mirror incorrectly. While the goal is to position it so that it looks right when you’re looking into it, you can have too much of an angle or not enough depending on the design and type of mirror you have. For this reason, many homeowners choose to have a mirror placed outside of the door, to allow the light to flow around the edges.

Another mistake that many people make with their bathroom lighting fixtures is putting light switches into difficult-to-reach areas. Some light switches are designed to only fit into the corner of a light fixture, making it difficult to install them in places such as along the baseboard or the outside edge of a tub or shower stall. For these reasons, it’s important to choose light fixtures that are designed for ease of use wherever possible.

A bathroom lighting mistake that often occurs is selecting a color temperature that is way too high or too low for the space. To determine whether a light fixture is the right color temperature for a given space, it’s important to note the average color temperature of different bathroom areas. For instance, white light fixtures will typically reflect light more than any other color. Therefore, if you’re planning on placing a ceiling fixture in your bathroom, it’s a good idea to set the fixture’s color temperature at around sixty-five to seventy degrees Fahrenheit. If you plan to place a fixture in an area that has a lot of blue or green colors, however, the color temperature should be closer to twelve degrees Fahrenheit.

When purchasing your new fixtures, it’s important to also purchase the right wattage and bulbs, as well. The average American uses about seven thousand kilowatts of electricity per person, which means that your fixtures should hold enough power to meet the needs of at least one bathroom. Bulbs, on the other hand, are available in a variety of wattages, ranging between one and three hundred watts. While using the wrong bulbs in a bathroom can cause a significant loss in lighting effectiveness over time, it’s also important to select bulbs that won’t heat up or burn out after only a few months of use. Bulbs that don’t meet this standard run the risk of not lasting very long.

One bathroom mistake that many homeowners make when installing lighting is overdoing either the wall sconces or the vanity lights. Overdoing either one can actually make the room look smaller than it actually is, so it’s important to pick a combination of wall sconces and vanity lights that provide the right level of light and task lighting. For example, you could install two wall sconces on each side of the mirror, but place a single overhead light in the middle. By doing so, you’ll gain the benefit of both task lighting and vanity lighting without having to overdo either one.